4 super-ways to transform stools and stools with your own

Reasons for manually renewing old chairs or decorating new ones can be great. This is the need to adapt furniture to the interior, the desire to correct design flaws, to restore the chairs that were inherited from my grandmother or found for nothing at a flea market. In this article we will tell you about 4 ways how to transform "four-legged friends" (including office and garden chairs) beyond recognition, and also imagine 70 cool photo-ideas of alterations.

See also: 3 simple ways how to update the kitchen set

Method 1: Painting a chair

Even the most old-fashioned or simply ordinary chair, for example, "Viennese" wooden, plastic, folding or office, can be transformed by staining. The main thing here is to choose the right color. Here are some inspirational examples, when one color alone saved furniture from moving to a landfill.

Viennese stool before and after staining

Viennese stool before and after staining

Folding chair before and after painting

Folding chair before and after painting

Stool before and after dyeing

Stool before and after dyeing

Stool before and after painting

Stool before and after painting

Old Viennese chair before and after restoration

Old Viennese chair before and after renovation

Plastic chairs

Some more examples of alteration of the most common Viennese chairs from bent beech, which are found almost in every house or cottage.

  • Ideas for renovation of Viennese chairs
  • Ideas for renovation of Viennese chairs
  • Ideas for renovation of Viennese chairs
  • Ideas for renovation of Viennese chairs
  • Ideas for renovation of Viennese chairs

And here are some cool ideas for painting stools.

  • The idea of ​​altering stools
  • The idea of ​​altering stools
  • The idea of ​​altering stools
  • The idea of ​​altering stools

Are you inspired? Then let's get down to practice!

For staining the chair you will need:

  • The paint is acrylic, and preferably chalky in one or several colors;
  • Synthetic flat brushes (separately for primer, paint and varnish);
  • Protective gloves (it is better to buy in a pharmacy);
  • Primer wood / metal (depending on the material of the frame);
  • Wax or matt varnish (polyurethane or acrylic);
  • Sandpaper medium and fine grain.

How to paint your own chair:

  1. Prepare a stool for painting: wash it from coarse dirt and dust, then sand with medium-grained sandpaper to remove the top layer of the old varnish or paint. The surface should be slightly rough.

Grinding the chair

  • If you want to update the metal chair, then it is not necessary to coat it (although it is more reliable to polish the upper gloss), but before the undercoating / painting, the skeleton must be degreased with white spirit.
  • Also, to avoid a tedious stage of sanding, you can, if you use chalk paint, but without a primer you will not get by.
  • If your stool is varnished, then it can be removed with a special means for washing the varnish.
  1. If the stool is damaged, for example, scratches, chips and cracks, fill them with furniture putty.

Putties for furniture

  1. Wipe the stool from the dust, wait for it to dry out and apply two coats of primer to the whole frame, letting each layer dry for about a day. Between the layers it is desirable to sand the primer with fine-grained sandpaper (220 #).
  2. Take a new brush and color the stool in 2-3 layers, letting each layer dry completely. Take care that the paint does not form stains.

Dyeing of a chair

  • If you want to dye a stool with the effect of scuffing, then first put on some places (for example, on the edges of the seat, backrest and armrests), say, dark gray or dark blue, and then cover them with wax. Next, paint the stool with the main paint in 2-3 layers. And, at last, having slightly worked a fine-grained skin to expose a dark "substrate".

How to make the effect of wear and tear

  • Want to achieve the effect of an ideal factory painting? Then be patient: every coat of primer and paint (except for the finishing layers) will have to be covered with fine-grained sandpaper. So the coating will be as flat and reliable as possible.
  • To paint only individual parts or details of a chair, use a paint tape.
  1. Treat the chair with wax or matte varnish. Voila, your "four-legged friend" has found a new life!

Helpful Hints:

  • Do not know which color to color the chair? You will not be mistaken if you paint it with white paint, because this color is the most universal, perfectly combined with any bright upholstery;
  • Before painting on the back of the chair, you can paste stucco decorations with carpentry glue;
  • To achieve the effect of a very old and dirty chair Provence style, you can use a dark brown wax;
  • Chalk paints - this is a relatively new type of paint, which has not yet entered the broad sale. However, we recommend using it, because due to its density, increased adhesion properties and super-fast drying (30 minutes), it saves a lot of time and effort. In Russia, you can buy chalk colors from the designer Daria Geiler, and in Kazakhstan - in the "Vernenskaya Manufactory." Also you can always order paints of foreign manufacturers - Annie Sloan and Rustoleum.

It is better to understand how to paint an old chair with your hands this video-master class will help you.

Method 2. Seat-tightening

Most often, if the chair has a soft seat, then the carcass staining is not enough to update it completely - you need to change the upholstery. Here are a few photo-examples of how a seat waist can turn an old chair into a stylish piece of decor.

Old stool before and after restoration

Old stool before and after restoration

Old stool before and after restoration

Old stool before and after restoration

Old stool before and after restoration

Office chair before and after restoration

Office chair before and after painting, replacing upholstery backrest and seat

By the way, if your chair or stool does not have a soft seat, then you can do it yourself: first cut out the MDF base exactly in the shape of the seat, then follow our masterclass by hanging it and, finally, screw it onto the carcass of the chair.

Viennese chairs with upholstery

To make a soft seat for a stool, just glue the foam directly to the base, and then tighten it with a cloth, clogging the stapler staples on the inside of the seat.

Stool with upholstery

Stool with improvised upholstery

  • Stool with improvised upholstery
  • Stool with improvised upholstery

For work you will need:

  • Antisteppler (or its alternative);
  • Furniture stepper and staples not more than the thickness of the seat base;
  • The cloth;
  • Foam is about 4 cm thick;
  • Batting or sintepon;
  • Scissors;
  • Knife-seriter for bread (with teeth);
  • Screwdriver.

How to update the upholstery of your chair:

  1. First we need to take the seat out of the chair frame with a nail or screwdriver.
  2. Remove the old upholstery with an anti-stapler and remove the filler if it is dilapidated (if it is in good condition, then it can be reused). Next, wipe the base of the seat from dust and dirt.
  • If the wooden seat base seems to you too old and unreliable, use it as a template to cut a new seat from the plywood.
  1. We put on the foam seat, circle its outline and cut it out.
  • Open foam rubber1
  • Open foam rubber2
  • Open foam rubber3
  1. Cream fabric and batting in such a size that they could wrap all sides of the seat (along with foam rubber), leaving free 10-15 cm. These surpluses are needed to make it easier to stretch the material.
  2. So, we got four blanks: the base, foam rubber, batting / sintepon and fabric. Now we need to put it all in a sandwich. The first thing is spreading the batting, we put foam rubber on it, and on the foam - the base of the seat with the wrong side up. Then simply bend the edges of the batting on the seat and, slightly pulling the material, fix it with a stapler. The corners of the batting can be cut off, or you can simply fold it and fasten it.
Stiffening of the chair

How to Restore a Chair Seat

  1. After all the batting is attached to the seat, cut off its excess.

Sitting in batting

  • If desired, the foam can be glued to the base or stitched around the perimeter, stepping back 5 mm from the edge of the seat.
  1. The most important moment has come - the stage of the constriction of sitting with a cloth. Spread the matter upside down and put a seat on it. Then bend the edges of the fabric along one side and fix it with a stapler. Now lightly stretch the fabric on the opposite side of the seat and also fix it with a stapler.
  • Seat-tightening1
  • Seat-tightening2

Repeat the procedure from the remaining two sides and proceed to the design of the corners - they need to be wrapped as shown in the photo below.

Ready-made seat

Chair after restoration

  1. We return seat to the place and fix it with "native" fasteners.

Restored chair with a soft seat

Helpful Hints:

  • Soft seating chair can be decorated with furniture studs along the perimeter.
  • Upholstery fabric should be selected in accordance with the style of the chair. So, for example, for a modern chair, traditional jacquard fabric will not do, and a classic chair with a smart back will hardly "make friends" with a cloth with a newfangled geometric print.
  • For the upholstery of the chair, the same fabric from which your curtains are made is ideal. In the interior, this coincidence will look very harmonious.
  • The print on the fabric can echo with the carved beams as shown in the photo below.

Updated chair with upholstery

A more visual masterclass of the upholstery of the seat of the old chair is shown in this video.

Method 3. Decoupage chair with paper

Do you want to decorate a chair with a cool print or disguise drawings with small defects like scratches and stains? This can be done with the help of decoupage techniques.

Decoupage chair

The idea of ​​decoupling the chair

Decoupage chair

The idea of ​​decoupling the chair

Decoupage chair

Decoupage chair

The idea of ​​decoupling the chair

Decoupage chair

The idea of ​​decoupling the chair

Decoupage stools

Decoupage stools

Decoupage of stools

You will need:

  • Any paper with the desired print, for example, it can be multi-layer napkins, pages from magazines and books, geographic maps, posters, wallpaper, etc .;
  • PVA glue;
  • Brushes 2 pieces (for applying glue and varnish);
  • Scissors;
  • Clear matt lacquer acrylic or polyurethane;
  • Water (if necessary);
  • Roller for working with large formats.

How to update the chairs in the technique of decoupage:

Step 1. Clean the stool from dirt and stains, if necessary, color, following the first instruction in the article.

Step 2. Cut out the fragment that you need from the selected polygraph. The workpiece can be as large (for example, in the shape of the seat and back), and very small.

  • If you use napkins, you first need to separate the top layer with the pattern and then cut it out.
  • If you want to paste the entire chair, including the legs, the paper should be chaotically broken into small pieces of about 10 × 10 cm, as shown in the next photo slider.
  • Full decoupage of the chair with small pieces of paper1
  • Full decoupage of the chair with small pieces of paper2
  • Full decoupage of the chair with small pieces of paper3
  • For decoupage of the back and seat, they must be removed from the chair frame with a screwdriver, and then used as a template for cutting the workpiece (see the photo below).

Decoupage chair плакатом

Step 3. Lubricate the place that you want to decorate with PVA glue and apply your picture on it, then smooth it with the brush with the glue residues, releasing all the air bubbles and smoothing the folds.

Decoupage chair своими руками

  • If the cut print is small, then it is better not to apply glue to the stool, but to the reverse side of the blank itself.
  • If the paper is very dense, then it should be slightly moistened in water - so it will become more plastic.

Decoupage chair плакатом

  • The top layer of glue is optional, but often desirable (in any case it should be thin).

Step 4. Repeat step 3 with the other parts of the stool and leave the glue to dry for about a day.

Step 5. Cover the decorated areas or the entire chair with a clear varnish in 4 layers, letting each layer dry completely. Done!

Updated chair in decoupage technique

Method 4. Decoupage of a chair with a cloth

It would seem that it is still possible to radically change the chair with your own hands, except by means of painting. In fact, there is another cool way - decoupage by cloth.

  • The chair, updated in this way, will serve surprisingly long even under heavy loads. And if from the fabric around the edges of the chair separate threads will be knocked out, you can simply cut them and process with a layer of PVA glue.
Decoupage of office chair

The idea of ​​decoupling the old chair

You will need:

  • The cloth;
  • Wooden chair;
  • Glue PVA or special glue for decoupage;
  • Sharp clerical or mock knife;
  • Brush for applying glue.

How to update the chair in the technique of decoupage:

Step 1. Using a screwdriver, remove the backrest and seat from the chair. If you want to paint a chair, do this before you disassemble it.

Step 2. Spread the fabric on a flat surface, place the seat on it and draw it around the contour, stepping about 2.5 cm from the edge, then cut out the workpiece.

Open the fabric for decoupling the chair

Step 3. Cover the outside of your seat with PVA glue, then place a cloth on it and smooth it out. Once the fabric has been leveled, cover it with PVA glue and leave to dry for the night.

Decoupage chair

Step 4. When the fabric dries, make sure that it has become absolutely stiff. Further cut off excess fabric with a sharp knife just at the edges of the seat.

Cut of surplus fabric

Step 5. Now again process the perimeter of the seat with PVA glue to prevent wear around the edges.

Step 6. Repeat steps 2-5 with the back of the chair and other details that you want to decorate, and finally, collect the chair back. The main condition for the successful restoration of the chair - the pattern must accurately repeat the shape of the decorated surface.

Decoupage of office chair

Here are a few more photo ideas for decorating the chair with a cloth.

Decoupage of office chair тканью

Decoupage of office chair with a cloth with additional protection with polyurethane varnish

Decoupage stools

Decoupage ideas for stools

Decoupage chair тканью

Decoupage chair тканью

Decoupage chair тканью

Decoupage chair тканью

Decoupage chair тканью

Add a comment